Graph information
This graph shows the value of all S.M.A.R.T attributes of drive sda (WDC WD5000AAKX-00ERMA0). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.
| Field | Internal name | Type | Warning | Critical | Info |
|---|---|---|---|---|---|
| Calibration_Retry_Count | Calibration_Retry_Count | gauge | 000: | ||
| Current_Pending_Sector | Current_Pending_Sector | gauge | 000: | ||
| Load_Cycle_Count | Load_Cycle_Count | gauge | 000: | ||
| Multi_Zone_Error_Rate | Multi_Zone_Error_Rate | gauge | 000: | ||
| Offline_Uncorrectable | Offline_Uncorrectable | gauge | 000: | ||
| Power_Cycle_Count | Power_Cycle_Count | gauge | 000: | ||
| Power_Off_Retract_Count | Power_Off_Retract_Count | gauge | 000: | ||
| Power_On_Hours | Power_On_Hours | gauge | 000: | ||
| Raw_Read_Error_Rate | Raw_Read_Error_Rate | gauge | 051: | ||
| Reallocated_Event_Count | Reallocated_Event_Count | gauge | 000: | ||
| Reallocated_Sector_Ct | Reallocated_Sector_Ct | gauge | 140: | ||
| Seek_Error_Rate | Seek_Error_Rate | gauge | 000: | ||
| Spin_Retry_Count | Spin_Retry_Count | gauge | 000: | ||
| Spin_Up_Time | Spin_Up_Time | gauge | 021: | ||
| Start_Stop_Count | Start_Stop_Count | gauge | 000: | ||
| Temperature_Celsius | Temperature_Celsius | gauge | 000: | ||
| UDMA_CRC_Error_Count | UDMA_CRC_Error_Count | gauge | 000: | ||
| smartctl_exit_status | smartctl_exit_status | gauge | 1 |
Zooming is very easy, it's done in 3 clicks (regular clicks, no drag&drop):
- Click to define the start of zoom.
- Click to define the ending of zoom.
- Refresh.
You can use the interactive form too.