Note: This service is in WARNING state because one of the values reported is outside the allowed range. Please see further down for information about the ranges and the graph for the values.
Graph information
This graph shows the value of all S.M.A.R.T attributes of drive sda (Samsung SSD 870 EVO 2TB). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.
| Field | Internal name | Type | Warning | Critical | Info |
|---|---|---|---|---|---|
| Reallocated_Sector_Ct | Reallocated_Sector_Ct | gauge | 010: | ||
| Power_On_Hours | Power_On_Hours | gauge | 000: | ||
| Power_Cycle_Count | Power_Cycle_Count | gauge | 000: | ||
| Wear_Leveling_Count | Wear_Leveling_Count | gauge | 000: | ||
| Used_Rsvd_Blk_Cnt_Tot | Used_Rsvd_Blk_Cnt_Tot | gauge | 010: | ||
| Program_Fail_Cnt_Total | Program_Fail_Cnt_Total | gauge | 010: | ||
| Erase_Fail_Count_Total | Erase_Fail_Count_Total | gauge | 010: | ||
| Runtime_Bad_Block | Runtime_Bad_Block | gauge | 010: | ||
| Uncorrectable_Error_Cnt | Uncorrectable_Error_Cnt | gauge | 000: | ||
| Airflow_Temperature_Cel | Airflow_Temperature_Cel | gauge | 000: | ||
| ECC_Error_Rate | ECC_Error_Rate | gauge | 000: | ||
| CRC_Error_Count | CRC_Error_Count | gauge | 000: | ||
| POR_Recovery_Count | POR_Recovery_Count | gauge | 000: | ||
| Total_LBAs_Written | Total_LBAs_Written | gauge | 000: | ||
| smartctl_exit_status | smartctl_exit_status | gauge | 1 |
Zooming is very easy, it's done in 3 clicks (regular clicks, no drag&drop):
- Click to define the start of zoom.
- Click to define the ending of zoom.
- Refresh.
You can use the interactive form too.