Note: This service is in WARNING state because one of the values reported is outside the allowed range. Please see further down for information about the ranges and the graph for the values.
daily graph
weekly graph
monthly graph
yearly graph

Graph information

This graph shows the value of all S.M.A.R.T attributes of drive sdb (ST3500630AS). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.

Field Internal name Type Warning Critical Info
Airflow_Temperature_Cel Airflow_Temperature_Cel gauge 045:
Current_Pending_Sector Current_Pending_Sector gauge 000:
Data_Address_Mark_Errs Data_Address_Mark_Errs gauge 000:
Hardware_ECC_Recovered Hardware_ECC_Recovered gauge 000:
High_Fly_Writes High_Fly_Writes gauge 000:
Multi_Zone_Error_Rate Multi_Zone_Error_Rate gauge 000:
Offline_Uncorrectable Offline_Uncorrectable gauge 000:
Power_Cycle_Count Power_Cycle_Count gauge 020:
Power_On_Hours Power_On_Hours gauge 000:
Raw_Read_Error_Rate Raw_Read_Error_Rate gauge 006:
Reallocated_Sector_Ct Reallocated_Sector_Ct gauge 036:
Reported_Uncorrect Reported_Uncorrect gauge 000:
Seek_Error_Rate Seek_Error_Rate gauge 030:
Spin_Retry_Count Spin_Retry_Count gauge 097:
Spin_Up_Time Spin_Up_Time gauge 000:
Start_Stop_Count Start_Stop_Count gauge 020:
Temperature_Celsius Temperature_Celsius gauge 000:
UDMA_CRC_Error_Count UDMA_CRC_Error_Count gauge 000:
smartctl_exit_status smartctl_exit_status gauge 1
This page was generated by Munin version 2.0.49 at 2020-10-22 23:31:10+0200 (CEST) with MunStrap template.