daily graph
weekly graph
monthly graph
yearly graph

Graph information

This graph shows the value of all S.M.A.R.T attributes of drive sda (ST1000NM0033-9ZM173). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.

Field Internal name Type Warning Critical Info
Airflow_Temperature_Cel Airflow_Temperature_Cel gauge 045:
Command_Timeout Command_Timeout gauge 000:
Current_Pending_Sector Current_Pending_Sector gauge 000:
End_to_End_Error End_to_End_Error gauge 099:
G_Sense_Error_Rate G_Sense_Error_Rate gauge 000:
Hardware_ECC_Recovered Hardware_ECC_Recovered gauge 000:
Head_Flying_Hours Head_Flying_Hours gauge 000:
High_Fly_Writes High_Fly_Writes gauge 000:
Load_Cycle_Count Load_Cycle_Count gauge 000:
Offline_Uncorrectable Offline_Uncorrectable gauge 000:
Power_Cycle_Count Power_Cycle_Count gauge 020:
Power_Off_Retract_Count Power_Off_Retract_Count gauge 000:
Power_On_Hours Power_On_Hours gauge 000:
Raw_Read_Error_Rate Raw_Read_Error_Rate gauge 044:
Reallocated_Event_Count Reallocated_Event_Count gauge 000:
Reallocated_Sector_Ct Reallocated_Sector_Ct gauge 010:
Reported_Uncorrect Reported_Uncorrect gauge 000:
Seek_Error_Rate Seek_Error_Rate gauge 030:
Spin_Retry_Count Spin_Retry_Count gauge 097:
Spin_Up_Time Spin_Up_Time gauge 000:
Start_Stop_Count Start_Stop_Count gauge 020:
Temperature_Celsius Temperature_Celsius gauge 000:
Total_LBAs_Read Total_LBAs_Read gauge 000:
Total_LBAs_Written Total_LBAs_Written gauge 000:
UDMA_CRC_Error_Count UDMA_CRC_Error_Count gauge 000:
smartctl_exit_status smartctl_exit_status gauge 1
This page was generated by Munin version 2.0.49 at 2020-10-22 21:31:12+0200 (CEST) with MunStrap template.